Modular System
DI
1-Tool Control Unit
This control unit operates with one soldering or desoldering tool and is fully compatible with 10 different JBC Tools delivering up to 130 W.
It works with JBC Exclusive Heating System and Sleep & Hibernation Modes.
Using the menu you can personalize over 20 parameters to help manage the soldering process.
The USB connector allows you to update software, create graphs and manage parameters from a PC.
For a basic working system, you need at least 1 stand, 1 tool and 1 cartridge.
References
DI-1D
120 V
DI-2D
230 V
DI-9D
100 V
Specifications
Selectable parameters
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Special features
Sleep and Hibernation mode
These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
Max. and min. temperature
Limit the temperature range in which the operator is allowed to work.
Temperatue levels
Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.
PIN protection
Keep station parameters protected against unauthorized access.
Connectivity
USB-B (front)
Firmware upgrade / Software PC / Traceability
Equipotential bonding
ESD/EOS
ESD safe
Power supply
Peak power
130 W – 23.5 V
Ambient operating temp.
10 to 40 ºC / 50 to 104 ºF
Dimensions and weight
Control Unit
180 x 94 x 106 mm / 2.15 kg.
7.09 x 3.70 x 4.17 in / 4.75 lb.
Package
220 x 213 x 160 mm / 2.50 kg.
8.66 x 8.39 x 6.30 in / 5.51 lb.
PDF印刷
